Tool type: Grooving Tool | Ø Shaft (d): 6mm | Length cutting edge (l1): 16mm | Corner chamfer (C): 0.04mm x 45° | Coating: S-Fire (TiAlN) | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 6.2mm | Cutting Edge Ø (F): 5.9mm | Cutting width (W): 0.5mm | Clearance (H): 0.8mm | Max. Turning length (xF): 3xF | Grooving depth (S): 0.6mm |
► 3~7 days delivery time
Grooving Tool type G60506-3V13
Description
Specifications
| Tool no. | G60506-3V13 |
Feed Fz and cutting speed Vc
| P1 Steel < 500 N/mm² | 0.03-0.08 mm/min⁻¹ 60-120 m/min |
| P2 Steel 500-700 N/mm² | 0.03-0.08 mm/min⁻¹ 60-100 m/min |
| P3 Steel 600-800 N/mm² | 0.03-0.08 mm/min⁻¹ 70-120 m/min |
| M2 Stainless steel < 750 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M3 Stainless steel < 850 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M4 Stainless steel < 950 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| N1 Aluminium alloys ≤ 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N2 Aluminium alloys > 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N4 Bronze and brass | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| H1 Hardened steel 35-45 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| H3 Hardened steel 52-62 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
Technical data
| Tool type | Grooving Tool |
| Ø Shaft (d) | 6mm |
| Length cutting edge (l1) | 16mm |
| Corner chamfer (C) | 0.04mm x 45° |
| Coating | S-Fire (TiAlN) |
| Chip breaker | V breaker groove |
| Position of the clamping surface | 0° |
| Min. bore Ø | 6.2mm |
| Cutting Edge Ø (F) | 5.9mm |
| Offset from tool center (FC) | 2.9mm |
| Lenght (Y) | 3mm |
| Cutting width (W) | 0.5mm |
| Clearance (H) | 0.8mm |
| Max. Turning length (xF) | 3xF |
| Grooving depth (S) | 0.6mm |
