47 degree Turning tool specifications

Tungsten carbide inner-hole front turning + back chamfering tool, can machine hole inner dimension and surface requirements and can also finish the chamfering.

Tungsten carbide inner-hole front turning + back chamfering tool has two machining purposes, one is to machine hole inner required dimensions the second is to chamfer off radius.

Tungsten carbide inner-hole front turning + back chamfering tool inner degrees are designed to 47 degree and 50 degree can adjust inner angle per customer machining requirements, to avoid interference with workpiece inner degree during machining process.

Baoje Tungsten carbide inner-hole front turning + back chamfering tool specializes micro hole machining has standard Tungsten carbide inner-hole front turning + back chamfering tool and customized Tungsten carbide inner-hole front turning + back chamfering tool, we normally provide in tungsten carbide shafts in Φ3 /Φ4 / Φ5 / Φ6 and we do customize Φ8 shaft when is necessary and required, all these tools can turn workpiece with hole diameter within: Φ10 and/or below.

Baoje micro boring tools are systematic standard cutting tools are all equipped with Baoje patented systematic tightening design, according to different turning tool outside diameters Φ3 /Φ4 / Φ5 / Φ6 / Φ8 we provide different boring tool holders, all with fool-proof tightening design, there will be no operational tool tightening problems.

Systematic standardized cutting tools can be quickly operated by new operator, test each cutting tool machining life and wearing and record the records to set up the suitable cutting tool changing schedule, have machine operator changes the cutting tool in time to decrease machine idle time and to avoid engineer time wasting on cutting tools changeover process.

We do customize the above tool every dimensions including F / FC / L1 / L2 / W / H / ΦD / Tip Radius / Front angle, according to your requirement beside standard 47 degree front turning + back chamfering tool.

Videos