Tool type: 10° Turning Tool | Ø Shaft (d): 3mm | Length cutting edge (l1): 14mm | Length effective (l2): 17mm | Corner radius (R): 0.05mm | Coating: Uncoated | Point angles: 10° | Chip breaker: V breaker groove | Position of the clamping surface: 0° | Min. bore Ø: 2mm | Cutting Edge Ø (F): 1.8mm | Max. Turning length (xF): 7xF |
► 3~7 days delivery time
10° Turning Tool type T318-7V10
Description
Specifications
| Tool no. | T318-7V10 |
Feed Fz and cutting speed Vc
| P1 Steel < 500 N/mm² | 0.03-0.08 mm/min⁻¹ 60-120 m/min |
| P2 Steel 500-700 N/mm² | 0.03-0.08 mm/min⁻¹ 60-100 m/min |
| P3 Steel 600-800 N/mm² | 0.03-0.08 mm/min⁻¹ 70-120 m/min |
| M2 Stainless steel < 750 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M3 Stainless steel < 850 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M4 Stainless steel < 950 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| N1 Aluminium alloys ≤ 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N2 Aluminium alloys > 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N4 Bronze and brass | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| H1 Hardened steel 35-45 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| H3 Hardened steel 52-62 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
Technical data
| Tool type | 10° Turning Tool |
| Ø Shaft (d) | 3mm |
| Length cutting edge (l1) | 14mm |
| Length effective (l2) | 17mm |
| Corner radius (R) | 0.05mm |
| Coating | Uncoated |
| Point angles | 10° |
| Chip breaker | V breaker groove |
| Min. bore Ø | 2.0mm |
| Cutting Edge Ø (F) | 1.8mm |
| Offset from tool center (FC) | 1.4mm |
| Lenght (Y) | 3mm |
| Max. Turning length (xF) | 7xF |
