Tool type: Threading Tool | Thread pitch (P): 1.25 | Ø Shaft (d): 5mm | Length cutting edge (l1): 14mm | Coating: TiN | Chip breaker: flat | Position of the clamping surface: 0° | Cutting Edge Ø (F): 4.5mm | Cutting width (W): 0.07mm | Clearance (H): 1.1mm | Max. Turning length (xF): 3xF | Flank angle (A): 60° |
► 3~7 days delivery time
Threading Tool type i545-3P11
Description
Specifications
| Tool no. | i545-3P11 |
Feed Fz and cutting speed Vc
| P1 Steel < 500 N/mm² | 0.03-0.08 mm/min⁻¹ 60-120 m/min |
| P2 Steel 500-700 N/mm² | 0.03-0.08 mm/min⁻¹ 60-100 m/min |
| P3 Steel 600-800 N/mm² | 0.03-0.08 mm/min⁻¹ 70-120 m/min |
| M2 Stainless steel < 750 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M3 Stainless steel < 850 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| M4 Stainless steel < 950 N/mm² | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| N1 Aluminium alloys ≤ 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N2 Aluminium alloys > 12% Si | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| N4 Bronze and brass | 0.03-0.08 mm/min⁻¹ 100-150 m/min |
| H1 Hardened steel 35-45 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
| H3 Hardened steel 52-62 HRC | 0.03-0.08 mm/min⁻¹ 50-80 m/min |
Technical data
| Tool type | Threading Tool |
| Thread pitch (P) | 1.25 |
| Ø Shaft (d) | 5mm |
| Length cutting edge (l1) | 14mm |
| Coating | TiN |
| Chip breaker | flat |
| Position of the clamping surface | 0° |
| Cutting Edge Ø (F) | 4.5mm |
| Offset from tool center (FC) | 2.4mm |
| Lenght (Y) | 3mm |
| Cutting width (W) | 0.07mm |
| Clearance (H) | 1.1mm |
| Max. Turning length (xF) | 3xF |
| Flank angle (A) | 60° |